The vertical pole of monitoring lamp pole is round conical octagonal structure in monitoring pole, lamp pole and lamps and lanterns are indispensable a member, let us know the specific content that has been below light pole respect now!
(1) material: monitoring pole steel is made of international standard low silicon, low carbon and high strength q235, with wall thickness of 4mm and bottom flange thickness of 14mm.
(2) design: monitor the calculation of the dimensions of the vertical rod structure and the basic structure. According to the appearance shape determined by the customer and the construction parameters of the manufacturer, it shall be equipped with anti-earthquake level 6 and anti-wind level 8.
(3) welding process: electric welding shall be adopted, with no leakage welding, smooth welding seam and no welding defects.
(4) plastic-spraying process: passivation after galvanized, with good adhesion and thickness of 65mm.Imported high quality plastic powder.In accordance with astm d3359-83.
(5) look and feel of the rod body: the shape and size meet the requirements of users, the shape is smooth and harmonious, beautiful and generous, the color and lustre is even, the diameter of the steel pipe is reasonable.
(6) perpendicularity test: after monitoring the vertical pole, use the theodolite to test the two-direction perpendicularity of the pole, and the perpendicularity deviation is 1.0.
The vertical pole of the monitoring lamp is a circular and conical structure with no distortion and distortion.Rod roundness standard 1.0mm.The surface of the bar body is smooth and consistent without transverse weld.Blade scratch test (25mm square) spray layer adhesion is not easy to peel off.Seal the top of the vertical rod and package to prevent water and air from entering, waterproof leakage measures are reliable.
