According to the characteristics and lighting requirements of the road and place, the design of the light pole should choose the conventional light pole or high pole lighting, the maximum light intensity projection direction and the intersection Angle of the vertical line should not exceed 65°, and the high pole lighting installed in the urban area should be coordinated with the environment on the premise of meeting the lighting function requirements.Please note that the lamppost should not be placed in a dangerous place or in a place where traffic is seriously obstructed during maintenance.Install general can adopt conventional lighting system, solar street lamps in the pavement, trees and shading serious road, or the narrow streets of buildings area is difficult to install, can choose horizontal cable arrangement, if can be connected with the road at the intersection of different color table light, solar street light, different installation height of different shapes or different arrangement.The intersection is dark.With the continuous expansion of urban scale, the width of urban roads is also increasing, which leads to larger space of intersection area, improper selection of vertical bar height and lamps, not only failing to meet the requirements of illumination maintenance and uniformity of design standards, but also serious glare.Strengthen lighting design, improve the science of lighting design.Scientific design is the biggest saving, to meet the higher requirements for lighting quality and visual environment conditions, not by reducing lighting standards to achieve energy saving, but to make full use of modern technology means to improve the level of lighting engineering design.The function of urban lighting should be emphasized, whether the design meets the relevant national standards and requirements and whether the economic benefit ratio is the best. The functional and decorative problems of road lighting should be studied. The lighting of road green belt should be reasonably designed, and the influence on road functional lighting should be fully considered.The design of landscape lighting should be characteristic and harmonious with the surrounding environment, without high energy consumption and light pollution.
